當重慶升降平臺http://www.ellieink.cn/液壓油溫過低時，油的粘度會(huì )增大，流動性也會(huì )減小，無形中增加了油阻力，嚴重影響了重慶升降平臺的工作效率。
When ningbo lift platform, hydraulic oil temperature is too low, the oil viscosity increases, the liquid will decrease, virtually increased the oil resistance, seriously affect the efficiency of the ningbo lift platform.

當重慶升降平臺http://www.ellieink.cn/液壓系統油溫過低時應該進行暖機運轉，起動發動機，當發動機空載運轉3~5min后，要用中速油門來提高發動機的轉速，進行部分操作使鋁合金升降機的任意一個動作運行到極限位置，當保持3到5分鐘后，液壓油會(huì )通過溢流升溫，如果油溫還不能達到正常運轉值，則需要適當地增加暖機運轉時間來提高液壓油油溫。
When ningbo lift platform hydraulic system working should be warm, when the oil temperature is too low, starting the engine, when the engine no-load running after 3 ~ 5 min, with a medium speed throttle to increase the speed of the engine, the partial operation of aluminum alloy lift any action to run to the limit position, when keep 3 to 5 minutes, the hydraulic oil will pass the overflow to heat up, normal operation values if the oil temperature is not reached,you will need to add a warm-up operation time appropriately to improve the hydraulic oil temperature.